A Quick Overlook of – Your Cheatsheet

A Guide to Common Plumbing Problems

There are many problems that homeowners face and one of them is plumbing problems. Plumbing problems can be of different types. Here are some of the most common ones. Some DIY solutions are given after finding out how to identify these problems.

Clogged drains is one of the common plumbing problems that we encounter. If your drains are clear, then water will not collect in the sink or tub but simply passes quickly. Your drains are clogged if the water does not drain. Your drains can be clogged by soap and hair. If you want to dissolve the soap clog then simply pour hot water into the drain. Use a drain snake or a wire coat hanger if there are solid objects in your drain.

You can also use chemical drain cleaners but these can damage your plumbing. The reason is that they contain lye which reacts with water with heat. This can burn or damage your plumbing. However, if this does not solve your clogged drains, then it is time to call a professional plumbing service and repair company.

Another plumbing problem that you can encounter is toilet backup. Use a toilet plunger to clear the blockage. IF the blockage is not removed, try flushing the toilet with a bucket of hot, soapy water from waist height. Your toilet can flush with the force or it can simply fill and not flush. After pouting 2 to 3 buckets of water, your problem may be solved.

Your water bill will increase if you have a leaky faucet. Although the mouth of the faucet leaks, the problem is actually with the handle. You need to determine which handle is responsible if you have a double handle sink hardware. Turn the hot and cold valves off one at a time and find out which handle is leaking.

When you find which handle is leaking, remove the parts. It is important to the pieces and make sure to replace the cartridges and o-rings are needed. Your handle will have a proper seal if you clean the parts. Then you won’t have to replace anything.

You will take much longer washing dishes without proper water pressure. You need to clean your aerator when this happens. Pressure is slowed down by sediment and minerals that build up. It is important to check if there is rust in your aerator. It is important to replace the rusted parts. Clean your aerator using a brush or soaking overnight in white vinegar. Then place it back tightly.

If you have tried everything but your plumbing problem persists, then you should call in your professional plumber to solve the problem.

plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair
plumbing service and repair plumbing service and repair